Flexible Warehouse Impact Protection
SEPPES FLEXIBLE INDUSTRIAL GUARDRAILS
Configure flexible safety barriers for pedestrian walkways, forklift aisles and machinery protection. Share your site layout, vehicle operating conditions and installation requirements to select a suitable warehouse guardrail system.
One Guardrail System · Three Application Areas
Rail Arrangements
Seppes Flexible Guardrail Configurations
Compare single-, double- and three-rail configurations, with post heights and rail dimensions listed below. Custom dimensions are available on request.
Configuration note: Yellow/black rails with black post caps. Post height and rail length refer to component dimensions, not the overall installed dimensions.
Model note: These configuration names describe rail arrangements and do not identify a specific SP model. Confirm the model and applicable impact conditions before ordering.
Single-Rail Configuration
- Post Diameter
- 125 mm
- Post Height
- 380 mm
- Post Wall Thickness
- 10 mm
- Rail Diameter
- 90 mm
- Rail Length
- 1500 mm
- Rail Count
- 1
Custom dimensions available on request.
Request This Configuration
Double-Rail Configuration
- Post Diameter
- 125 mm
- Post Height
- 570 mm
- Post Wall Thickness
- 10 mm
- Rail Diameter
- 90 mm
- Rail Length
- 1500 mm
- Rail Count
- 2
Custom dimensions available on request.
Request This Configuration
Three-Rail Configuration
- Post Diameter
- 125 mm
- Post Height
- 1160 mm
- Post Wall Thickness
- 10 mm
- Rail Diameter
- 90 mm
- Rail Length
- 1500 mm
- Rail Count
- 3
Custom dimensions available on request.
Request This ConfigurationSEPPES · Product Details
SEPPES Flexible Guardrail Construction Highlights
Four practical highlights show how the SEPPES rail, energy-absorbing structure, anchored base and controlled impact response work together in an industrial traffic protection system.
Controlled Forklift Impact Response
The impact sequence shows the guardrail deflecting when a forklift contacts the middle of the barrier span. Final selection should consider the actual vehicle mass, travel speed, impact angle and site layout.
Reinforced Polymer Rail Structure
A layered, internally reinforced polymer rail is designed to distribute impact forces across the section while maintaining a smooth, highly visible protective surface.
Energy-Absorbing Rail Deflection
The flexible rail and post system is designed to deflect during contact, helping absorb and redirect impact energy before returning toward its original position.
Anchored Base Connection
The post base is mechanically fixed to a suitable concrete foundation. Anchor selection and installation details should be confirmed for the slab condition and project loads.
SEPPES · Site Planning
SEPPES Guardrail Layout Solutions
Plan the guardrail arrangement around traffic routes, access points and the assets to be protected. Final model selection depends on the site layout and operating conditions.
Pedestrian Walkway Layouts
Plan barrier runs along pedestrian routes and identify access points, crossings and the available installation space.
Illustrative layout — not an installation drawing.
Forklift Aisle Layouts
Review straight runs, corners and nearby structures against vehicle routes, operating weight and travel speed.
Illustrative layout — not an installation drawing.
Machinery Protection Layouts
Define the protection perimeter while keeping operator access, maintenance entry and material routes in the layout.
Illustrative layout — not an installation drawing.
Applications industrielles
SEPPES Flexible Guardrail Applications
Plan SEPPES flexible guardrails for vehicle routes, pedestrian zones, machinery protection and site conditions.
Receiving · Storage · Dispatch
Entrepôts et centres de distribution
Plan warehouse guardrail systems around receiving areas, storage aisles and dispatch zones. Match barrier runs and access points to pallet movements, forklift routes and pedestrian circulation.
View Warehouse Application
Production · Assembly · Machinery
Manufacturing & Assembly Plants
Configure flexible industrial guard rails around production lines, assembly areas and machinery. Include operator access, maintenance entry and material supply routes when planning the protection layout.
View Manufacturing Application
Picking · Packing · Order Dispatch
Centres de distribution e-commerce
Plan flexible safety barriers for picking routes, packing stations and dispatch areas. Review warehouse traffic safety requirements against pedestrian movement and powered-vehicle routes, while retaining access for daily operations.
View Fulfillment ApplicationContactez SEPPES
SEPPES Flexible Guardrail Quote
Parlez-nous des exigences de votre projet. Notre équipe vous recommandera des solutions de portes industrielles adaptées et vous fournira un devis personnalisé.
WhatsApp : +86 180 2021 6635
FAQ acheteur
SEPPES Flexible Guardrail FAQs
Find answers about flexible guardrail models, dimensions, customization, impact conditions, installation requirements and project quotations.
Comment choisir le bon système de garde-corps flexible pour entrepôt ?
Commencez par la zone à protéger, la hauteur et la longueur requises du garde-corps, ainsi que l'espace d'installation disponible. Comparez ensuite la configuration des rails, les dimensions des poteaux et les conditions d'impact indiquées pour chaque modèle. Notre gamme comprend des conceptions à un rail et à trois rails, ainsi qu'une option à rail rectangulaire. Pour les zones de circulation de chariots élévateurs, fournissez le poids en service du véhicule, la vitesse de déplacement et la configuration de la circulation afin que la configuration puisse être évaluée par rapport aux exigences de votre projet. Pour une comparaison étape par étape, consultez notre guide de sélection des barrières de protection pour chariots élévateurs.
Quelles spécifications sont disponibles pour les modèles de glissière de sécurité SP ?
La gamme à simple rail rond comprend SP-90C, SP-125C, SP-160C et SP-180C. Les diamètres extérieurs des poteaux vont de 90 à 180 mm, tandis que les diamètres des rails et les épaisseurs de paroi varient selon le modèle.
La gamme à trois rails comprend SP-90, SP-125, SP-160 et SP-180. Le SP-180 combine deux rails de 90 mm avec un rail de 125 mm.
Pour une configuration à rail rectangulaire, SP-80-180C utilise un poteau en acier de 114 mm de diamètre avec une épaisseur de paroi de 5 mm, ainsi qu'un rail de 180 × 80 mm avec une épaisseur de paroi de 10 à 11 mm. Consultez le tableau comparatif des modèles pour les spécifications complètes des glissières de sécurité flexibles.
La hauteur, la longueur et la disposition des glissières de sécurité peuvent-elles être personnalisées ?
Oui. La hauteur du garde-corps, la longueur des rails, le diamètre des tubes, le nombre de rails et les configurations d'angle peuvent être personnalisés selon les exigences du projet. Partagez votre plan d'implantation et les dimensions requises afin que la configuration personnalisée des garde-corps d'entrepôt puisse être examinée. Les dimensions finales et les spécifications du modèle applicable doivent être confirmées avant la commande ; les données d'impact indiquées ne doivent pas être automatiquement appliquées à une configuration personnalisée différente.
How do I compare forklift impact data across guardrail models?
Compare the complete conditions, not vehicle weight alone. The model data specifies vehicle weight, travel speed, a 45° or 90° impact angle, and a rear-of-vehicle impact at the center of the barrier span.
Par exemple, SP-125 lists a 2.0-tonne vehicle at 6 km/h for a 45° impact, ou 5 km/h for a 90° impact. SP-180 lists a 3.0-tonne vehicle at 9 km/h for a 45° impact, ou 8 km/h for a 90° impact.
These figures describe the stated forklift impact protection test conditions. They are not load-bearing capacities or an unconditional guarantee for every collision scenario.
What should be checked before installing flexible guardrails?
Confirm the guardrail layout, base positions, installation surface and anchoring requirements before installation. The product information shows floor-mounted bases anchored into concrete, with anchoring adhesive and customized anchor hardware.
The specified 10.9-grade anchor hardware has a listed maximum tensile load of 16 kN. This is an anchor-related figure, not the impact rating of the complete guardrail system. Concrete strength, slab thickness and anchoring depth are not defined in the supplied specifications and must be confirmed for the warehouse guardrail installation project.
What materials and colors are available for industrial guardrails?
The guardrail tubing uses a modified polymer blend. The round-post models listed in the specifications incorporate internal steel reinforcement, while the base assemblies combine metal, rubber and other components. Exposed metal surfaces on the bases receive a black coating.
The specified colors are yellow RAL 1003 et black RAL 9017. Confirm the color arrangement for the posts, rails and base components when selecting flexible safety barriers.
What information is needed for a warehouse guardrail quote?
Please provide your preferred model, if known, together with the required protection length, height and quantity. Include the areas to be protected, forklift type, operating weight, travel speed and installation conditions.
A site layout, traffic-route drawing or photographs will help explain pedestrian routes, vehicle movements and the proposed guardrail positions. Please also include your company name, project country and target schedule so we can review the warehouse guardrail system requirements and prepare a project-specific quotation.