Flexible Warehouse Impact Protection
SEPPES FLEXIBLE INDUSTRIAL GUARDRAILS
Configure flexible safety barriers for pedestrian walkways, forklift aisles and machinery protection. Share your site layout, vehicle operating conditions and installation requirements to select a suitable warehouse guardrail system.
One Guardrail System · Three Application Areas
Rail Arrangements
Seppes Flexible Guardrail Configurations
Compare single-, double- and three-rail configurations, with post heights and rail dimensions listed below. Custom dimensions are available on request.
Configuration note: Yellow/black rails with black post caps. Post height and rail length refer to component dimensions, not the overall installed dimensions.
Model note: These configuration names describe rail arrangements and do not identify a specific SP model. Confirm the model and applicable impact conditions before ordering.
Single-Rail Configuration
- Post Diameter
- 125 mm
- Post Height
- 380 mm
- Post Wall Thickness
- 10 mm
- Rail Diameter
- 90 mm
- Rail Length
- 1500 mm
- Rail Count
- 1
Custom dimensions available on request.
Request This Configuration
Double-Rail Configuration
- Post Diameter
- 125 mm
- Post Height
- 570 mm
- Post Wall Thickness
- 10 mm
- Rail Diameter
- 90 mm
- Rail Length
- 1500 mm
- Rail Count
- 2
Custom dimensions available on request.
Request This Configuration
Three-Rail Configuration
- Post Diameter
- 125 mm
- Post Height
- 1160 mm
- Post Wall Thickness
- 10 mm
- Rail Diameter
- 90 mm
- Rail Length
- 1500 mm
- Rail Count
- 3
Custom dimensions available on request.
Request This ConfigurationSEPPES · Product Details
SEPPES Flexible Guardrail Construction Highlights
Four practical highlights show how the SEPPES rail, energy-absorbing structure, anchored base and controlled impact response work together in an industrial traffic protection system.
Controlled Forklift Impact Response
The impact sequence shows the guardrail deflecting when a forklift contacts the middle of the barrier span. Final selection should consider the actual vehicle mass, travel speed, impact angle and site layout.
Reinforced Polymer Rail Structure
A layered, internally reinforced polymer rail is designed to distribute impact forces across the section while maintaining a smooth, highly visible protective surface.
Energy-Absorbing Rail Deflection
The flexible rail and post system is designed to deflect during contact, helping absorb and redirect impact energy before returning toward its original position.
Anchored Base Connection
The post base is mechanically fixed to a suitable concrete foundation. Anchor selection and installation details should be confirmed for the slab condition and project loads.
SEPPES · Site Planning
SEPPES Guardrail Layout Solutions
Plan the guardrail arrangement around traffic routes, access points and the assets to be protected. Final model selection depends on the site layout and operating conditions.
Pedestrian Walkway Layouts
Plan barrier runs along pedestrian routes and identify access points, crossings and the available installation space.
Illustrative layout — not an installation drawing.
Forklift Aisle Layouts
Review straight runs, corners and nearby structures against vehicle routes, operating weight and travel speed.
Illustrative layout — not an installation drawing.
Machinery Protection Layouts
Define the protection perimeter while keeping operator access, maintenance entry and material routes in the layout.
Illustrative layout — not an installation drawing.
التطبيقات الصناعية
SEPPES Flexible Guardrail Applications
Plan SEPPES flexible guardrails for vehicle routes, pedestrian zones, machinery protection and site conditions.
Receiving · Storage · Dispatch
المستودعات ومراكز التوزيع
Plan warehouse guardrail systems around receiving areas, storage aisles and dispatch zones. Match barrier runs and access points to pallet movements, forklift routes and pedestrian circulation.
View Warehouse Application
Production · Assembly · Machinery
Manufacturing & Assembly Plants
Configure flexible industrial guard rails around production lines, assembly areas and machinery. Include operator access, maintenance entry and material supply routes when planning the protection layout.
View Manufacturing Application
Picking · Packing · Order Dispatch
مراكز تنفيذ التجارة الإلكترونية
Plan flexible safety barriers for picking routes, packing stations and dispatch areas. Review warehouse traffic safety requirements against pedestrian movement and powered-vehicle routes, while retaining access for daily operations.
View Fulfillment Applicationاتصل بـ SEPPES
SEPPES Flexible Guardrail Quote
أخبرنا عن متطلبات مشروعك. سيقوم فريقنا بالتوصية بحلول مناسبة للأبواب الصناعية وتقديم عرض سعر مخصص.
واتساب: +86 180 2021 6635
الأسئلة الشائعة للمشترين
SEPPES Flexible Guardrail FAQs
Find answers about flexible guardrail models, dimensions, customization, impact conditions, installation requirements and project quotations.
كيف أختار نظام الحواجز الواقية المرنة المناسب للمستودع؟
ابدأ بالمنطقة التي تحتاج إلى حمايتها، وارتفاع الدرابزين المطلوب وطوله، ومساحة التركيب المتاحة. ثم قارن تكوين القضبان وأبعاد الأعمدة وظروف الصدم المدرجة لكل طراز. تشمل مجموعتنا تصاميم بقضيب واحد وثلاثة قضبان، بالإضافة إلى خيار بقضيب مستطيل. لمناطق حركة الرافعات الشوكية، قدّم وزن تشغيل المركبة وسرعة السير وتخطيط الحركة المرورية حتى يمكن مراجعة التكوين مقابل متطلبات مشروعك. للحصول على مقارنة خطوة بخطوة، اقرأ دليل اختيار حواجز الحماية من الرافعات الشوكية.
For warehouse layouts that require separation between pedestrians and forklift traffic, read our warehouse pedestrian barriers guide to learn how to improve pedestrian safety and organize traffic routes.
ما المواصفات المتاحة لطرازات حاجز الحماية SP؟
تشمل مجموعة السكة المفردة SP-90C وSP-125C وSP-160C وSP-180C. تتراوح الأقطار الخارجية للأعمدة من 90 إلى 180 مم, ، بينما تختلف أقطار السكك وسماكات الجدران حسب الطراز.
تشمل مجموعة السكك الثلاثية SP-90 وSP-125 وSP-160 وSP-180. يجمع الطراز SP-180 بين سكتين بقطر 90 مم وسكة واحدة بقطر 125 مم.
لتكوين السكة المستطيلة،, SP-80-180C يستخدم عموداً فولاذياً بقطر 114 مم وسماكة جدار 5 مم, ، إلى جانب سكة بمقاس 180 × 80 مم وسماكة جدار 10–11 مم. يُرجى الرجوع إلى جدول مقارنة الطرازات للاطلاع على المواصفات الكاملة للحواجز المرنة.
هل يمكن تخصيص ارتفاع الدرابزين وطوله وتخطيطه؟
نعم. يمكن تخصيص ارتفاع الحاجز وطول السكة وقطر الأنبوب وعدد السكك وتكوينات الزوايا وفقًا لمتطلبات المشروع. شارك رسم التخطيط والأبعاد المطلوبة حتى يمكن مراجعة تكوين حواجز المستودع المخصص. يجب تأكيد الأبعاد النهائية ومواصفات الطراز المعمول بها قبل الطلب؛ ولا ينبغي تطبيق بيانات الصدم المدرجة تلقائيًا على تكوين مخصص مختلف.
How do I compare forklift impact data across guardrail models?
Compare the complete conditions, not vehicle weight alone. The model data specifies vehicle weight, travel speed, a 45° or 90° impact angle, and a rear-of-vehicle impact at the center of the barrier span.
على سبيل المثال, SP-125 lists a 2.0-tonne vehicle at 6 km/h for a 45° impactأو 5 km/h for a 90° impact. SP-180 lists a 3.0-tonne vehicle at 9 km/h for a 45° impactأو 8 km/h for a 90° impact.
These figures describe the stated forklift impact protection test conditions. They are not load-bearing capacities or an unconditional guarantee for every collision scenario.
What should be checked before installing flexible guardrails?
Confirm the guardrail layout, base positions, installation surface and anchoring requirements before installation. The product information shows floor-mounted bases anchored into concrete, with anchoring adhesive and customized anchor hardware.
The specified 10.9-grade anchor hardware has a listed maximum tensile load of 16 kN. This is an anchor-related figure, not the impact rating of the complete guardrail system. Concrete strength, slab thickness and anchoring depth are not defined in the supplied specifications and must be confirmed for the warehouse guardrail installation project.
What materials and colors are available for industrial guardrails?
The guardrail tubing uses a modified polymer blend. The round-post models listed in the specifications incorporate internal steel reinforcement, while the base assemblies combine metal, rubber and other components. Exposed metal surfaces on the bases receive a black coating.
The specified colors are yellow RAL 1003 و black RAL 9017. Confirm the color arrangement for the posts, rails and base components when selecting flexible safety barriers.
What information is needed for a warehouse guardrail quote?
Please provide your preferred model, if known, together with the required protection length, height and quantity. Include the areas to be protected, forklift type, operating weight, travel speed and installation conditions.
A site layout, traffic-route drawing or photographs will help explain pedestrian routes, vehicle movements and the proposed guardrail positions. Please also include your company name, project country and target schedule so we can review the warehouse guardrail system requirements and prepare a project-specific quotation.