適切な選択 commercial sectional door size is not only about measuring width and height. For warehouses and factories, vehicle clearance, headroom, installation space, insulation and operating frequency should also be considered.
here is no single standard size for every industrial project, but the following dimensions are commonly used as reference points:
| ドアサイズ | Typical Application |
|---|---|
| 8 × 8 ft | Small warehouse or workshop |
| 10 × 10 ft | Forklift and general warehouse access |
| 12 × 12 ft | Factory and loading areas |
| 14 × 14 ft | Large vehicles and industrial equipment |
| Custom Size | Special machinery or oversized openings |
For most 工業用セクショナルドア, the final size should be selected according to the actual building opening and traffic requirements.
What Measurements Are Required?
Before ordering a sectional overhead door, check:
- Opening width
- Opening height
- Headroom above the opening
- Left and right side room
- Available ceiling space
These measurements help determine both the door size and the correct track configuration.
Door Size and Lift Type
The available space above the opening also affects how the door operates.
スタンダードリフト is suitable for most warehouses with normal ceiling conditions.
High Lift Sectional Door allows the door to travel higher vertically before turning along the ceiling, making better use of tall buildings.
垂直リフト keeps the door moving upward vertically and is suitable for facilities with sufficient space above the opening.
Standard Size or Custom Size?
Standard dimensions may work for common warehouse entrances, but many industrial projects require custom sectional doors.
Customization is especially useful when the opening must accommodate:
- フォークリフト
- Trucks
- AGVs
- Large machinery
- Special loading equipment
For larger doors, the manufacturer should also consider the track system, spring configuration, operator capacity and wind resistance.
Manufacturer's Recommendation
Do not choose an industrial door only by the opening size.
The best solution should consider the clear opening, vehicle dimensions, installation space, opening frequency and working environment together.
Providing accurate W × H dimensions and photos or drawings of the installation area can help the manufacturer recommend a more suitable sectional door configuration.